Document Type : Research Paper

Author

University of Baghdad - College of Science

10.37652/juaps.2009.15463

Abstract

Abstract: Depth estimation for dyke like bodies has been investigated through using Fraser filter. The procedure consists of applying Fraser filter to magnetic profiles data due to dyke-like sources. Three ways of calculation are followed to estimate the depths of these bodies and good results with low percentage errors are achieved. Firstly, defining the width of the profile at two third of maximum amplitude of the residual filtered out data gives directly the depth to the top of the body. Secondly, plotting filtered data values at various levels of amplitudes against distances between points of these levels at the two lines of maximum slopes of the residual profile give a straight slope line. A projection line from the amplitude axis at two third value of maximum amplitude to the slope line read directly at distance axis the depth to the top of the body. Thirdly, the zero crossover distance defined on the plot of filtered data against distance divided by two gives directly the depth to the top of the body.Low percentage errors are found by applying the three ways, although there are small variations between them, most values are too low. This method of depth estimation is also applied to published field example and the result is too good. The procedure is simply applied and it gives a reliable and accepted depth values compared with actual depth values of the dyke-like bodies. The present procedure can be considered as a new scheme for depth estimation of magnetic sources if one considers the low percentage errors and the success of the results particularly in mid latitudes.

Keywords

Main Subjects

(1) Li Xiong, 2003. On the use of different methods for estimating magnetic depth. The Leading edge. P1090-1099.
(2) Peters, L. J. 1949. The direct approach to magnetic interpretation and its practical application. Geophys. V. 14 ,P 290-320.
(3) Bean, R.J. 1966. A rapid graphical solution for the aeromagnetic anomaly of the two-dimensional tabular body. Geophys. V. 31,P. 963-970.
(4) Naudy, H. 1971. Automatic determination of depth on aeromagnetic profiles. Geophys. V. 36, P.717-722.
(5) Murthy, I.V.R., Rao Viswesara, C. and Krishna, G. G. (1980). A gradient method for interpreting magnetic anomalies due to horizontal circular cylinder, infinite dykes infinite dykes and vertical steps. Proc. Indian Acad. Sci. V. 89, P. 31-42.
(6) Ku,C.C. and Sharp,J.A. 1983. Werner deconvolution for automated magnetic interpretation and its refinement using Marquardt's inverse modeling. Geophys. V. 48, P.754-774.
(7) Atchuta Rao, D, Ram Babu, H.V. and Sankor Narayan, P.V. 1981. Interpretation  of magnetic anomalies due to dikes: The complex gradient method. Geophys. V.46, P.1572-1578.
(8) Roest, W.E. and Verhoef, J. 1992. Magnetic interpretation using 3-D analytical signal. Geophys. V.57,  P. 116-125.