Effect of Chemical Solutions on Some Mechanical Properties of (Fe + Cu/UPE)

Ismael, Mustafa; Anter, Faik Hammad

doi:10.37652/juaps.2022.172329

Document Type : Research Paper

Authors

Mustafa Ismael ¹
Faik Hammad Anter ²

¹ Department of Physics, College of Science, University of Anbar,Anbar, Iraq

² Department of Physics, College of Science, University of Anbar, Iraq

https://doi.org/10.37652/juaps.2022.172329

Abstract

This research includes the preparation of polymeric composites by (Hand lay-up method) of unsaturated polyester resin as a matrix material and (iron, copper) particles as strengthening materials with different weight ratios (5%, 10%, 15%, 20%). The hardness and impact strength properties are studied before and after immersion in (NaOH) solution and (HCl) solution at a normality of (0.3N) and for a period of one immersion (30 days). The results showed that the hardness and impact values increased with the increase in the percentage of iron and copper before immersion, after immersion, that hardness and impact strength values increased with increasing the iron and copper ratio of the compounds For all samples, but their value was lower than in normal conditions. And also these values in the (HCL) solution were lower than the (NaOH) solution.

Keywords

Main Subjects

Physics

References

[1] Salih M. K.,2016, "Study of the effect of fiber type and the number of reinforcing layers on some mechanical properties of polymeric overlays", Journal of university of Anbar for pure science, Vol. 10, No .3 , PP. 93- 98.

[2] Callister.W.D., 2003,"Materials science &Engineering An Introduction", Jownwiley & sons , Inc.

[3] Hassan.H.S.,2014, " Study of mechanical properties for unsaturated polyester reinforced with glass fiber", Journal of university of Anbar for pure science, Vol. 8, No.2, PP. 91- 96.

[4] Al-rawi.K.R., and Majeed.N.H.,2015, " Mechanical and thermal properties of epoxy-graphite composites" Baghdad Journal of Science, , Vol. 12, No .1, PP. 40- 45.

[5] Gibson.R.F.,1994,"Principles of composite material mechanics", Mc. Graw Hill, Inc, New York.

[6] Ibrahiem.R.E.,and Sulyman.E.Z.,2019, " Preparation polymeric composites from epoxy with randomly woven fiber glass and studies the mechanical properties" Al-Rafidain Science Journal, Vol. 28, No. 3, PP. 105- 115.

[7] Alaa.M. H.,2012,''Study The physical properties of polymer Blends Reinforced by Metal Laminates and Microcotton ,''Master Thesis, University Of Technolongy, Department Of Material Applied Sciences.

[8] Dinokaran.K.,and Alagar.M.,2003,"Development and characterization of vinyl ester oligomer (veo) modified unsaturated polyester intercross linked and composites", International T. of Polymeric materials, Tayler and Francis Inc. Vol. , PP()m2003., vol. 52 (11-12),pp. 957-966.

[9] William.D.,and Callister.Jr.,2007, "Materials science and Engineering An Introduction", 7th ed.

[10] Kopeliovich.D., 2012,"Shore (Durometer) Hardness Test", Subs & Tech, last modified: 28 Apr.

[11] Ibrahim.B. K.,2019, "Effect of sulfuric acid solution on thermal conductivity and impact strength of epoxy resin reinforced by silicon dioxide powder"Iraqi Journal of Physics, Vol.17, No. 41, PP. 82- 90, (2019).

[12] Skoog.D.A.,West.D.M.,Holer.F.J.,and Crouch.S.R., 2013, ^,,Fundamental of Analytical Chemistry. 9th Edition, Cengage Learning^,, .

[13] بلقیس محمد ضیاء " تسلیح ودراسة خواص، الابوکسی والبولی استر غیر المشبع" اطروحة دکتوراه , قسم العلوم التطبیقیة الجامعة التکنلوجیة, (2006 ).

[14] Musa B. H. ,2014," Effect of glass powder on some mechanical properties of polymer matrix composite material", Journal of Al-Nahrain University, Vol.17. No. 2, PP.108-115.

[15] Khaleel H. K.,2016 " Effect of chemical solutions on some of the physical and mechanical properties for Particulate / Epoxy Composites", M.Sc. thesis, University of Anbar, College of Education for Pure Sciences, Department of physics.

[16] Atewi.A.H.,2012, "Study of some mechanical properties for a polymer material reinforcement with chip or powder copper", Engineering Journal, Vol.18, No .5, PP.103- 113.

[17] Dheyaa.B.M., and Mnajid.A. H.,2012," Effect of liquids absorption on some mechanical and thermal properties for polymeric composites", Proceedings of international conference on engineering and information technology, ISBN:978-1-77136-064-7,Canada.

Journal of University of Anbar for Pure Science

Effect of Chemical Solutions on Some Mechanical Properties of (Fe + Cu/UPE)

References

References

Volume 14, Issue 1
April 2020
Page 58-63

Effect of Chemical Solutions on Some Mechanical Properties of (Fe + Cu/UPE)

References

References

Volume 14, Issue 1April 2020Page 58-63

Volume 14, Issue 1
April 2020
Page 58-63