Document Type : Research Paper

Authors

1 University of Diyala, College of Science, Department of Physics, Diyala, Iraq

2 University of Diyala, College of Science, Department of Physics, Diyala, Iraq.

3 University of Garmian, College of Education, Department of Physics, Garmian, Iraq.

Abstract

Cobalt ferrite Co0.8Fe2.2O4 nanoparticles were prepared using the sol-gel auto combustion process. The effects of calcination temperature on structural, magnetic, and electrical properties were studied. The cubic spinel phase fashioning of ferrite structure was confirmed using Fourier Transform-Infrared Spectroscopy (FT-IR) and X-ray Diffraction Patterns (XRD). The size of the formed crystallite of ferrite samples is ranged from 24.530 to 49.067 nm and it is found to be dependent on calcination. According to the images, which were taken by a Field Emission-Scanning Electron Microscope (FE-SEM), the particle size increases with raising the calcination temperature. Energy Dispersive Spectrum (EDS) was used to confirm the presence of Co, Fe, and O in all samples. A Vibrating Sample Magnetometer (VSM) was used to study the magnetic properties such as coercivity, saturation magnetization, and remanence field for the as-burnt and calcined samples. All samples exhibited ferrimagnetic behavior. As the calcination temperature rises, saturation magnetization (M_s), remanent magnetization (M_r), and squareness ratio (M_r/ M_s) increased. This behavior is related to the spin canting and disturbance in the surface spin. At room temperature, the dielectric loss factor (ε''), dielectric loss angle (tanδ), dielectric constant (ε'), and the conductivity σ_ac of all samples were examined as a function of frequency using the LCR meter. The changes in dielectric properties have been characterized at frequencies ranged from 50Hz to 2MHz based on Koop's theory, Maxwell-Wagner polarization, and electron hopping. As frequency rose, all-dielectric properties exhibited natural behavior.
 

 

Keywords

Main Subjects

[1] A. Goldman, Modern ferrite technology: Springer Science & Business Media, 2006.
[2] S. W. Lee, S. Bae, Y. Takemura, I.-B. Shim, T. M. Kim, J. Kim, H. J. Lee, S. Zurn, C. S. Kim, “Self-  heating characteristics of cobalt ferrite nanoparticles for hyperthermia application,” Journal of Magnetism and Magnetic Materials, vol. 310, no. 2, pp. 2868-2870, 2007.
[3] U. Häfeli, W. Schütt, J. Teller, and M. Zborowski, Scientific and clinical applications of magnetic  carriers: Springer Science & Business Media, 2013.
[4] S. Singh, S. Munjal, and N. Khare, “Strain/defect induced enhanced coercivity in single domain CoFe2O4 nanoparticles,” Journal of Magnetism and Magnetic Materials, vol. 386, pp. 69-73, 2015.
[5] M. P. Reddy, A. Mohamed, X. Zhou, S. Du, and Q. Huang, “A facile hydrothermal synthesis, characterization and magnetic properties of mesoporous CoFe2O4 nanospheres,” Journal of Magnetism and Magnetic Materials, vol. 388, pp. 40-44, 2015.
[6] R. Mohamed, M. Rashad, F. Haraz, and W. Sigmund, “Structure and magnetic properties of  nanocrystalline cobalt ferrite powders synthesized using organic acid precursor method,” Journal of Magnetic Materials, vol. 322, no. 14, pp. 2058-2064, 2010.
[7] V. Cabuil, V. Dupuis, D. Talbot, and S. Neveu,  “Ionic magnetic fluid based on cobalt ferrite nanoparticles: influence of hydrothermal treatment on the nanoparticle size,” Journal of Magnetism and Magnetic Materials, vol. 323, no. 10, pp. 1238-1241, 2011.
[8] E. V. Gopalan, P. Joy, I. Al-Omari, D. S. Kumar, Y. Yoshida, and M. Anantharaman, “On the structural, magnetic and electrical properties of sol-gel derived nanosized cobalt ferrite,” Journal of Alloys and Compounds, vol. 485, no. 1-2, pp. 711-717, 2009.
[9] M. B. Mohamed, and  M. Yehia,  “Cation distribution and magnetic properties of nanocrystalline gallium substituted cobalt ferrite,” Journal  of Alloys and Compounds, vol. 615, pp. 181-187, 2014.
[10] S. I. Ahmad, A. Rauf, T. Mohammed, A. Bahafi, D. R. Kumar, and M. B. Suresh, “Dielectric, impedance, AC conductivity and low-temperature magnetic studies of Ce and Sm co-substituted nanocrystalline cobalt ferrite,” Journal of Magnetism and Magnetic Materials, vol. 492, pp. 165666,2019.
[11]  P. Roy, and J. Bera, “Enhancement of the magnetic properties of Ni–Cu–Zn ferrites with thesubstitution of a small fraction of lanthanum for iron,” Materials research bulletin, vol. 42, no. 1, pp.77- 83, 2007.
[12]  M. Goodarz Naseri, E. B. Saion, H. Abbastabar Ahangar, A. H. Shaari, and M. Hashim, “Simple synthesis and characterization of cobalt ferrite nanoparticles by a thermal treatment method,” Journalof Nanomaterials, vol. 2010, 2010.
[13] A. Mohammad, S. ALIRIDHA, and T. Mubarak, “STRUCTURAL AND MAGNETIC PROPERTIES OF Mg-Co FERRITE NANOPARTICLES,” Digest Journal of Nanomaterials & Biostructures (DJNB), vol. 13, no. 3, 2018.
[14] A. M. Mohammad, S. M. A. Ridha, and T. H. Mubarak, “Dielectric properties of Cr-substituted cobalt ferrite nanoparticles synthesis by citrate-gel auto combustion method,” Int. J. Appl. Eng. Res, vol. 13, no. 8, pp. 6026-6035, 2018.
[15]  Z. Rouhani, J. Karimi-Sabet, M. Mehdipourghazi, A. Hadi, and A. Dastbaz, “Response surfaceoptimization of hydrothermal synthesis of Bismuth ferrite nanoparticles under supercritical water conditions: Application for photocatalytic degradation of Tetracycline,” Environmental Nanotechnology, Monitoring & Management, vol. 11, pp. 100198, 2019.
[16]  A. Mohammad, M. Mohammed, and L. Hussein, “STRUCTURAL, MAGNETIC AND OPTICAL PROPERTIES OF Co0.5Ni0. 5Fe2O4 NANOPARTICLES SYNTHESIZED BY SOL-GEL AUTO COMBUSTION METHOD,” DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES,vol. 15, no. 1, pp. 231-241, 2020.
[17]  R. Zhang, L. Sun, Z. Wang, W. Hao, E. Cao, and Y. Zhang, “Dielectric and magnetic properties of CoFe2O4 prepared by sol-gel auto-combustion method,” Materials Research Bulletin, vol. 98, pp. 133-138, 2018.
[18]  M. Kurian, S. Thankachan, D. S. Nair, E. Aswathy, A. Babu, A. Thomas, and B. K. KT, “Structural, magnetic, and acidic properties of cobalt ferrite nanoparticles synthesised by wet chemical methods,” Journal of Advanced Ceramics, vol. 4, no. 3, pp. 199-205, 2015.
[19]  R. S. Yadav, J. Havlica, J. Masilko, L. Kalina, J. Wasserbauer, M. Hajdúchová, V. Enev, I. Kuřitka, and Z. Kožáková, “Impact of Nd3+ in CoFe2O4 spinel ferrite nanoparticles on cation distribution,
      structural and magnetic properties,” Journal of Magnetism and Magnetic materials, vol. 399, pp. 109-117, 2016.
[20]  M. Eltabey, A. Massoud, and C. Radu, “Microstructure and superparamagnetic properties of Mg-Ni-Cd ferrites nanoparticles,” Journal of Nanomaterials, vol. 2014, 2014.
[21]  C. Ragupathi, J. J. Vijaya, L. J. Kennedy, and M. Bououdina, “Combustion synthesis, structure,  magnetic and optical properties of cobalt aluminate spinel nanocrystals,” Ceramics International, vol. 40, no. 8, pp. 13067-13074, 2014.
[22]  T. Prabhakaran, and J. Hemalatha, “Chemical control on the size and properties of nano NiFe2O4synthesized by sol–gel autocombustion method,” Ceramics International, vol. 40, no. 2, pp. 3315-3324, 2014.
[23]  B. Purnama, and A. T. Wijayanta, “Effect of calcination temperature on structural and magneticproperties in cobalt ferrite nano particles,” Journal of King Saud University-Science, vol. 31, no. 4,pp. 956-960, 2019.
[24]  R. S. Yadav, J. Havlica, J. Masilko, L. Kalina, M. Hajdúchová, V. Enev, J. Wasserbauer, I. Kuřitka, and Z. Kozakova, “Structural, Cation Distribution, and Magnetic Properties of CoFe2O4 Spinel Ferrite Nanoparticles Synthesized Using a Starch-Assisted Sol–Gel Auto-Combustion Method,” Journal ofSuperconductivity and Novel Magnetism, vol. 28, no. 6, pp. 1851-1861, 2015.
[25] R. S. Yadav, J. Havlica, M. Hnatko, P. Šajgalík, C. Alexander, M. Palou, E. Bartoníčková, M. Boháč,F. Frajkorová, and J. Masilko, “Magnetic properties of Co1− xZnxFe2O4 spinel ferrite nanoparticlessynthesized by starch-assisted sol–gel autocombustion method and its ball milling,” Journal ofMagnetism and Magnetic Materials, vol. 378, pp. 190-199, 2015.
 [26]  M. Raghasudha, D. Ravinder, and P. Veerasomaiah, “Influence of Cr 3+ ion on the dielectric properties of nano crystalline Mg-ferrites synthesized by citrate-gel method,” 2013.
[27]  K. M. Batoo, and M.-S. Abd El-sadek, “Electrical and magnetic transport properties of Ni–Cu–Mg ferrite nanoparticles prepared by sol–gel method,” Journal of alloys and compounds, vol. 566, pp. 112-119, 2013.
[28]  M. Cernea, P. Galizia, I. Ciuchi, G. Aldica, V. Mihalache, L. Diamandescu, and C. Galassi, “CoFe2O4 magnetic ceramic derived from gel and densified by spark plasma sintering,” Journal of Alloys and Compounds, vol. 656, pp. 854-862, 2016.
[29]  M. M. L. Sonia, S. Anand, V. M. Vinosel, M. A. Janifer, S. Pauline, and A. Manikandan, “Effect of lattice strain on structure, morphology and magneto-dielectric properties of spinel NiGdxFe2− xO4  ferrite nano-crystallites synthesized by sol-gel route,” Journal of Magnetism and Magnetic Materials, vol. 466, pp. 238-251, 2018.
[30]  M. Ahsan, and F. Khan, “Structural and electrical properties of manganese doped cobalt ferritenanoparticles,” Mater Sci. Nanotechnol.(2018) 2 (2): 1, vol. 9, 2018.
[31]  R. Nongjai, S. Khan, K. Asokan, H. Ahmed, and I. Khan, “Magnetic and electrical properties of In doped cobalt ferrite nanoparticles,” Journal of Applied Physics, vol. 112, no. 8, pp. 084321, 2012.
[32]  R. Rani, G. Kumar, K. M. Batoo, and M. Singh, “Influence of temperature on the electric, dielectricand AC conductivity properties of nano-crystalline zinc substituted cobalt ferrite synthesized by  solution combustion technique,” Applied Physics A, vol. 115, no. 4, pp. 1401-1407, 2014.
[33]  S. Suresh, “Synthesis, structural and dielectric properties of zinc sulfide nanoparticles,” International Journal of Physical Sciences, vol. 8, no. 21, pp. 1121-1127, 2013.